Elektromag manufactures wide range of Permanent and Electromagnetic Separators for various applications. Magnetic Separators are used for several purposes such as removal of ferrous contamination from raw material for protection of downstream machinery such as Crushers, Pulverisers.
Elektromag has over 60 years of experience in manufacturing wide range of Magnetic Separators using technology acquired from Licensing Agreements from German and Australian Collaborators. The product range includes small magnetic equipment such as Magnetic Rods, Grids and Plate magnets. For larger installations the range includes Drum Type Magnetic Separators, Overband Magnetic Separators and Magnetic Pulleys etc.
OVERBAND MAGNETIC SEPARATORS
Electromagnetic Overband magnetic separators are used for heavy duty applications which may be beyond.
SUSPENSION MAGNET
ELEKTROMAG Suspension Magnets are used when only small contamination levels are encountered.
MAGNETIC PULLEY
ELEKTROMAG Electro Magnetic Pulleys have a magnet system of disk-shaped pole bodies with inserted coils.
MAGNETIC DRUM
The Double Drum Machine is used for handling large capacities or difficult materials
Back to top
Electromagnetic Suspension/Overband Magnets are used for heavy duty applications which may be beyond the reach of Permanent Suspension/Overband Magnets. They are used typically in applications such as Raw Material handling of Coal, Iron Ore, Limestone , Sugar cane etc. in Thermal Power Plants, Steel Plants , Ports, Sugar Mills etc. They are used for removing magnetic parts from non-magnetic materials in order to protect crusher, mills, processing plants etc. against too much wear and damage. They serve for cleaning non-magnetic bulk goods with iron contamination, for instance cleaning of foundry sand, coal and the like. They are used for recovering magnetic material from ore, steel mill slag etc. Magnets can be installed for Belt widths ranging up to 2500 mm. width and Operating heights upto 1100 mm. The Electromagnet coil may be Natural Air Cooled or Oil Cooled depending on customer's preference.
ELEKTROMAG Electro Magnetic Pulleys have a magnet system of disk-shaped pole bodies with inserted coils. The pole bodies are made from steel of high permeability. The coils are normally made of Aluminium, rated for class ‘H’ insulation, however, Copper-coils can also be supplied. Pole bodies and coil form a complete unit. All coil connections are led to a terminal box on the face of the outer pole from where they are connected to sliprings through the shaft.
Non-magnetic coil covers are provided between the pole bodies in such a manner that protection against dust and water is guaranteed. The rings made of non-magnetic material at the two outer pole bodies guarantee a good support of the conveyor belt over the entire pulley width.
The electro-magnetic pulleys are placed in two generously dimensioned pedestals with self-aligning ball or roller bearings. The surfaces of the Electro-Magnetic Pulley are turned cylindrically.
D.C. is fed to the Electro-Magnetic Pulleys via two slip rings. The sliding contact device is enclosed in a dustproof housing and contains the necessary carbon brushes.
The Double Drum Machine is used for handling large capacities or difficult materials requiring more than one magnetic treatment. Double Drum Machines with individual jig shaker tray, can also be supplied. Triple Drum Machines can also be supplied if required.
ELEKTROMAG Suspension Magnets are used when only small contamination levels are encountered. The material accumulated on the pole face must be removed at regular intervals. When stopping the plant and in case of power failure, the iron drops back into the material to be conveyed.